|
Focus
on Fatigue |
MoreVision has developed a number of programs to post-process finite element
results, calculate fatigue damage and to plot damage directly onto the FE
mesh. The assessments cover code of practices used in many countries (UK -
BS7608, France -UIC 515-4 Goodman Diagram, German DIN 15 018, Swedish Volvo
standards) |
|
|
Experimental Methods |
MoreVision strain gauge testing compliments its analysis services. |
|
|
Software
Success |
MoreVision has sold
its innovative
engineering calculation software Research Engineers Inc. for worldwide distribution. The product has already earned MoreVision a
DTI SMART award for innovation. |
|
| Composite
Analysis |
MoreVision
has extensive experience in the modelling composite materials. |
|
|
Dynamic
Analysis |
|
Avoid resonance by performing a dynamic analysis. |
|
|
Plastic
Analysis |
|
What
happens when stress rises above yield? - it may not be as
severe a situation as you think. |
|
|
|
|
  Thermal Analysis |
|
 When a component
is subject to extreme temperatures or a high thermal flux its is often
necessary to perform a thermal analysis to determine the temperature
distribution throughout the component. This will check
that operational temperature limits of constituent parts are not
exceeded or to determine the need for safety guards to protect
personnel from extreme heat (or cold).
|
|
|
Typically model includes boundary temperatures, heat input/output, the
relevant conduction properties, convection surface details and
radiation surface details.
 |
|
ANSYS Script Generators
 
Often a large number of items require assessment and Morevision have
developed ANSYS script generators to speed up the process of
assessment. The model size has been reduced in these examples by taking benefit of axi-symmetry. |
|
Thermal
Analysis |
|
 Three
variants of a water cooled electrical motor stator were
modelled, each variant had a slightly different method of cooling. Heat inputs and
convection surfaces were applied to the model and the steady
state temperature distribution was determined.
This gave the information the designers required to choose the most
efficient cooling system. |
|
|
|
|
|
Top
Software Tools |
MoreVision
have some 20 years experience of problem solving with ANSYSŪ. They
have developed a library of macros and software tools customizing
ANSYS for specific problems. |
|
|
Bolted Joint Analysis |
 MoreVision uses 'Boltcalc' software
in conjunction with FEA for fast & accurate assessments. |
|
|
Partnering
Client Design Teams |
 Will it fall off? Is it strong
enough? How long will it last? These are the questions on the minds of many
designers. MoreVision can team up to perform simple strength assessments to
allow designers to move forward with the confidence that their designs will
ultimately satisfy structural criteria. |
|
|
Independent
Design Audits |
|
A
fresh pair of eyes can offer an new insight into design critical
problems. |
|
|
Fixed
Price Contracts |
|
Whenever
possible MoreVision offers fixed price contracts from the outset of a
project. |
|
|
Failure
Investigations |
|
Simply strengthening an area
may not give you the results you want and could make the problem worse.
Before a solution can even be considered it is imperative that the mechanics
of the failure are completely understood. |
|
|
Can
we live with cracks? |
 Let MoreVision help you decide using their custom PD6493 software. |
|
|
Too
Hot to Handle? |
|
MoreVision
helps clients solve temperature problems. |
|
|
Stress
Overload? |
|
Use
MoreVision to offload work when you're too busy to cope. |
|
|
|
