Mechanical Engineering Analysis and Test

Focus on Fatigue

MoreVision has developed a number of programs to post-process finite element results, calculate fatigue damage and to plot damage directly onto the FE mesh. The assessments cover code of practices used in many countries (UK - BS7608, France -UIC 515-4 Goodman Diagram, German DIN 15 018, Swedish Volvo standards)
Experimental Methods

MoreVision strain gauge testing compliments its analysis services.
Software Success

MoreVision has sold its innovative engineering calculation software Research Engineers Inc. for worldwide distribution. The product has already earned MoreVision a DTI SMART award for innovation.
Composite Analysis

MoreVision has extensive experience in the modelling composite materials.
Dynamic Analysis
Avoid resonance by performing a dynamic analysis.
Plastic Analysis
What happens when stress rises above yield? - it may not be as severe a situation as you think.

Oil Industry

Analysis Services To Support the Oil Industry
 MoreVision have undertaken a number of projects to validate of design of oil extraction equipment.


Snagging Loads
Sub-sea oil equipment may be snagged by fishing trawler nets. Our assessment considered if the equipment was capable of withstanding such loads. Forces on the leg joint to the main structure was stressed beyond yield but the analysis showed acceptable levels of plasticity and the permanent set in the leg.


Sleeve Analysis

These analyses consider one concentric part within another. Its is possible to make use of axisymetric models which allows for very detailed modelling without a massive computational effort. Often it is necessary to use contact elements as an inner part subject to a high internal pressure may expand and be supported by the external part. Sometimes the analysis is used to consider the performance of a seal as each part deflects.


Pipe Stress Analysis

Stresses in pipes and pipe attachment points is considered to the requirements of ASME.


Valve Stress Analysis
Valves are subject to enormous pressures, this analysis ensured that stresses remain within the limits prescribed by ASME III. 
Top Software Tools

MoreVision have some 20 years experience of problem solving with ANSYSŪ. They have developed a library of macros and software tools customizing ANSYS for specific problems.
Bolted Joint Analysis
MoreVision uses 'Boltcalc' software in conjunction with FEA for fast & accurate assessments.
Partnering Client Design Teams
Will it fall off? Is it strong enough? How long will it last? These are the questions on the minds of many designers. MoreVision can team up to perform simple strength assessments to allow designers to move forward with the confidence that their designs will ultimately satisfy structural criteria.
Independent Design Audits
A fresh pair of eyes can offer an new  insight into design critical problems.
Fixed Price Contracts
Whenever possible MoreVision offers fixed price contracts from the outset of a project.
Failure Investigations
Simply strengthening an area may not give you the results you want and could make the problem worse. Before a solution can even be considered it is imperative that the mechanics of the failure are completely understood. 
Can we live with cracks?
Let MoreVision help you decide using their custom PD6493 software.
Too Hot to Handle?
MoreVision helps clients solve temperature problems.
Stress Overload?
Use MoreVision to offload work when you're too busy to cope.